$gzip [option] [file]
-d : 圧縮ファイルを展開する
-l : 圧縮ファイルのリスト表示
-r : 再帰的にデジレクトリを圧縮する
-t : 圧縮ファイルの整合性チェック
-v : 圧縮ファイルのメッセージ表示
$ gzip hoge.txt
$ gzip -d hoge.zip
gzip, gunzip, zcat - compress or expand files
gzip [ -acdfhlLnNrtvV19 ] [-S suffix] [ name ... ]
gunzip [ -acfhlLnNrtvV ] [-S suffix] [ name ... ]
zcat [ -fhLV ] [ name ... ]
Gzip reduces the size of the named files using Lempel-Ziv coding (LZ77). Whenever possible, each file is
replaced by one with the extension .gz, while keeping the same ownership modes, access and modification
times. (The default extension is -gz for VMS, z for MSDOS, OS/2 FAT, Windows NT FAT and Atari.) If no
files are specified, or if a file name is "-", the standard input is compressed to the standard output.
Gzip will only attempt to compress regular files. In particular, it will ignore symbolic links.
If the compressed file name is too long for its file system, gzip truncates it. Gzip attempts to truncate
only the parts of the file name longer than 3 characters. (A part is delimited by dots.) If the name con-
sists of small parts only, the longest parts are truncated. For example, if file names are limited to 14
characters, gzip.msdos.exe is compressed to gzi.msd.exe.gz. Names are not truncated on systems which do
not have a limit on file name length.
By default, gzip keeps the original file name and timestamp in the compressed file. These are used when
decompressing the file with the -N option. This is useful when the compressed file name was truncated or
when the time stamp was not preserved after a file transfer.
Compressed files can be restored to their original form using gzip -d or gunzip or zcat. If the original
name saved in the compressed file is not suitable for its file system, a new name is constructed from the
original one to make it legal.
gunzip takes a list of files on its command line and replaces each file whose name ends with .gz, -gz, .z,
-z, _z or .Z and which begins with the correct magic number with an uncompressed file without the original
extension. gunzip also recognizes the special extensions .tgz and .taz as shorthands for .tar.gz and
.tar.Z respectively. When compressing, gzip uses the .tgz extension if necessary instead of truncating a
file with a .tar extension.
gunzip can currently decompress files created by gzip, zip, compress, compress -H or pack. The detection
of the input format is automatic. When using the first two formats, gunzip checks a 32 bit CRC. For pack,
gunzip checks the uncompressed length. The standard compress format was not designed to allow consistency
checks. However gunzip is sometimes able to detect a bad .Z file. If you get an error when uncompressing a
.Z file, do not assume that the .Z file is correct simply because the standard uncompress does not com-
plain. This generally means that the standard uncompress does not check its input, and happily generates
garbage output. The SCO compress -H format (lzh compression method) does not include a CRC but also
allows some consistency checks.
Files created by zip can be uncompressed by gzip only if they have a single member compressed with the
’deflation’ method. This feature is only intended to help conversion of tar.zip files to the tar.gz for-
mat. To extract a zip file with a single member, use a command like gunzip <foo .zip or gunzip -S .zip
foo.zip. To extract zip files with several members, use unzip instead of gunzip.
zcat is identical to gunzip -c. (On some systems, zcat may be installed as gzcat to preserve the original
link to compress.) zcat uncompresses either a list of files on the command line or its standard input and
writes the uncompressed data on standard output. zcat will uncompress files that have the correct magic
number whether they have a .gz suffix or not.
Gzip uses the Lempel-Ziv algorithm used in zip and PKZIP. The amount of compression obtained depends on
the size of the input and the distribution of common substrings. Typically, text such as source code or
English is reduced by 60-70%. Compression is generally much better than that achieved by LZW (as used in
compress), Huffman coding (as used in pack), or adaptive Huffman coding (compact).
Compression is always performed, even if the compressed file is slightly larger than the original. The
worst case expansion is a few bytes for the gzip file header, plus 5 bytes every 32K block, or an expan-
sion ratio of 0.015% for large files. Note that the actual number of used disk blocks almost never
increases. gzip preserves the mode, ownership and timestamps of files when compressing or decompressing.
The gzip file format is specified in P. Deutsch, GZIP file format specification version 4.3,
<ftp://ftp.isi.edu/in-notes/rfc1952.txt>, Internet RFC 1952 (May 1996). The zip deflation format is spec-
ified in P. Deutsch, DEFLATE Compressed Data Format Specification version 1.3, <ftp: //ftp.isi.edu/in-
notes/rfc1951.txt>, Internet RFC 1951 (May 1996).
Ascii text mode: convert end-of-lines using local conventions. This option is supported only on
some non-Unix systems. For MSDOS, CR LF is converted to LF when compressing, and LF is converted to
CR LF when decompressing.
-c --stdout --to-stdout
Write output on standard output; keep original files unchanged. If there are several input files,
the output consists of a sequence of independently compressed members. To obtain better compres-
sion, concatenate all input files before compressing them.
-d --decompress --uncompress
Force compression or decompression even if the file has multiple links or the corresponding file
already exists, or if the compressed data is read from or written to a terminal. If the input data
is not in a format recognized by gzip, and if the option --stdout is also given, copy the input
data without change to the standard output: let zcat behave as cat. If -f is not given, and when
not running in the background, gzip prompts to verify whether an existing file should be overwrit-
Display a help screen and quit.
For each compressed file, list the following fields:
compressed size: size of the compressed file
uncompressed size: size of the uncompressed file
ratio: compression ratio (0.0% if unknown)
uncompressed_name: name of the uncompressed file
The uncompressed size is given as -1 for files not in gzip format, such as compressed .Z files. To
get the uncompressed size for such a file, you can use:
zcat file.Z | wc -c
In combination with the --verbose option, the following fields are also displayed:
method: compression method
crc: the 32-bit CRC of the uncompressed data
date & time: time stamp for the uncompressed file
The compression methods currently supported are deflate, compress, lzh (SCO compress -H) and pack.
The crc is given as ffffffff for a file not in gzip format.
With --name, the uncompressed name, date and time are those stored within the compress file if
With --verbose, the size totals and compression ratio for all files is also displayed, unless some
sizes are unknown. With --quiet, the title and totals lines are not displayed.
Display the gzip license and quit.
When compressing, do not save the original file name and time stamp by default. (The original name
is always saved if the name had to be truncated.) When decompressing, do not restore the original
file name if present (remove only the gzip suffix from the compressed file name) and do not restore
the original time stamp if present (copy it from the compressed file). This option is the default
When compressing, always save the original file name and time stamp; this is the default. When
decompressing, restore the original file name and time stamp if present. This option is useful on
systems which have a limit on file name length or when the time stamp has been lost after a file
Suppress all warnings.
Travel the directory structure recursively. If any of the file names specified on the command line
are directories, gzip will descend into the directory and compress all the files it finds there (or
decompress them in the case of gunzip ).
-S .suf --suffix .suf
When compressing, use suffix .suf instead of .gz. Any non-empty suffix can be given, but suffixes
other than .z and .gz should be avoided to avoid confusion when files are transferred to other sys-
When decompressing, add .suf to the beginning of the list of suffixes to try, when deriving an out-
put file name from an input file name.
Test. Check the compressed file integrity.
Verbose. Display the name and percentage reduction for each file compressed or decompressed.
Version. Display the version number and compilation options then quit.
-# --fast --best
Regulate the speed of compression using the specified digit #, where -1 or --fast indicates the
fastest compression method (less compression) and -9 or --best indicates the slowest compression
method (best compression). The default compression level is -6 (that is, biased towards high com-
pression at expense of speed).
Multiple compressed files can be concatenated. In this case, gunzip will extract all members at once. For
gzip -c file1 > foo.gz
gzip -c file2 >> foo.gz
gunzip -c foo
is equivalent to
cat file1 file2
In case of damage to one member of a .gz file, other members can still be recovered (if the damaged member
is removed). However, you can get better compression by compressing all members at once:
cat file1 file2 | gzip > foo.gz
compresses better than
gzip -c file1 file2 > foo.gz
If you want to recompress concatenated files to get better compression, do:
gzip -cd old.gz | gzip > new.gz
If a compressed file consists of several members, the uncompressed size and CRC reported by the --list
option applies to the last member only. If you need the uncompressed size for all members, you can use:
gzip -cd file.gz | wc -c
If you wish to create a single archive file with multiple members so that members can later be extracted
independently, use an archiver such as tar or zip. GNU tar supports the -z option to invoke gzip transpar-
ently. gzip is designed as a complement to tar, not as a replacement.
The environment variable GZIP can hold a set of default options for gzip. These options are interpreted
first and can be overwritten by explicit command line parameters. For example:
for sh: GZIP="-8v --name"; export GZIP
for csh: setenv GZIP "-8v --name"
for MSDOS: set GZIP=-8v --name
On Vax/VMS, the name of the environment variable is GZIP_OPT, to avoid a conflict with the symbol set for
invocation of the program.
znew(1), zcmp(1), zmore(1), zforce(1), gzexe(1), zip(1), unzip(1), compress(1), pack(1), compact(1)
The gzip file format is specified in P. Deutsch, GZIP file format specification version 4.3,
</ftp:><ftp: //ftp.isi.edu/in-notes/rfc1952.txt>, Internet RFC 1952 (May 1996). The zip deflation format is spec-
ified in P. Deutsch, DEFLATE Compressed Data Format Specification version 1.3, </ftp:><ftp: //ftp.isi.edu/in-
notes/rfc1951.txt>, Internet RFC 1951 (May 1996).
Exit status is normally 0; if an error occurs, exit status is 1. If a warning occurs, exit status is 2.
Usage: gzip [-cdfhlLnNrtvV19] [-S suffix] [file ...]
Invalid options were specified on the command line.
file: not in gzip format
The file specified to gunzip has not been compressed.
file: Corrupt input. Use zcat to recover some data.
The compressed file has been damaged. The data up to the point of failure can be recovered using
zcat file > recover
file: compressed with xx bits, can only handle yy bits
File was compressed (using LZW) by a program that could deal with more bits than the decompress
code on this machine. Recompress the file with gzip, which compresses better and uses less memory.
file: already has .gz suffix -- no change
The file is assumed to be already compressed. Rename the file and try again.
file already exists; do you wish to overwrite (y or n)?
Respond "y" if you want the output file to be replaced; "n" if not.
gunzip: corrupt input
A SIGSEGV violation was detected which usually means that the input file has been corrupted.
xx.x% Percentage of the input saved by compression.
(Relevant only for -v and -l.)
-- not a regular file or directory: ignored
When the input file is not a regular file or directory, (e.g. a symbolic link, socket, FIFO, device
file), it is left unaltered.
-- has xx other links: unchanged
The input file has links; it is left unchanged. See ln(1) for more information. Use the -f flag to
force compression of multiply-linked files.
When writing compressed data to a tape, it is generally necessary to pad the output with zeroes up to a
block boundary. When the data is read and the whole block is passed to gunzip for decompression, gunzip
detects that there is extra trailing garbage after the compressed data and emits a warning by default. You
have to use the --quiet option to suppress the warning. This option can be set in the GZIP environment
variable as in:
for sh: GZIP="-q" tar -xfz --block-compress /dev/rst0
for csh: (setenv GZIP -q; tar -xfz --block-compr /dev/rst0
In the above example, gzip is invoked implicitly by the -z option of GNU tar. Make sure that the same
block size (-b option of tar) is used for reading and writing compressed data on tapes. (This example
assumes you are using the GNU version of tar.)
The gzip format represents the input size modulo 2^32, so the --list option reports incorrect uncompressed
sizes and compression ratios for uncompressed files 4 GB and larger. To work around this problem, you can
use the following command to discover a large uncompressed file’s true size:
zcat file.gz | wc -c
The --list option reports sizes as -1 and crc as ffffffff if the compressed file is on a non seekable
In some rare cases, the --best option gives worse compression than the default compression level (-6). On
some highly redundant files, compress compresses better than gzip.
Copyright © 1998, 1999, 2001, 2002 Free Software Foundation, Inc.
Copyright © 1992, 1993 Jean-loup Gailly
Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice
and this permission notice are preserved on all copies.
Permission is granted to copy and distribute modified versions of this manual under the conditions for
verbatim copying, provided that the entire resulting derived work is distributed under the terms of a per-
mission notice identical to this one.
Permission is granted to copy and distribute translations of this manual into another language, under the
above conditions for modified versions, except that this permission notice may be stated in a translation
approved by the Foundation.